Magnetic furniture glides

Replace the felt.
Lose the hassle.

Install the base once. Snap off the felt glide to clean it or replace it—without unscrewing the base.

For suitable wooden legs: straight or slightly angled, not heavily angled. Check the approximately 1″ (26 mm) mounting diameter.

Assembled MagniGlide complete system with permanent screw-mounted base and replaceable floor-contact glide piece with high-density virgin wool felt

Replaceable wool felt

Watch the magnetic glide in action

Install the base onceReplaceable wool feltDesigned for easy upkeep

Not your ordinary felt glide

About MagniGlide

Keep the base. Replace the felt. The magnetic glide lifts off by hand, so routine replacement needs no re-gluing, digging out pads or special removal tools.

Designed by a maintenance professional with 16 years of hands-on experience with furniture glides. A screwdriver is needed for the first installation; the magnetic felt glide can then be removed by hand for cleaning or replacement.

Why ordinary glides need upkeep

Let’s be honest: most furniture glides eventually become a maintenance headache.

Adhesive pads can fall off and leave stubborn glue buildup. Nail-on pads can loosen as the mounting hole wears. Traditional screw-on glides can expose metal hardware to the floor once the felt wears through.

Even some modular systems introduce new frustrations: stiff plastic tabs, jammed friction fits, special removal tools and replacement pads that are difficult to pull out.

A simpler way to maintain your glides

MagniGlide was engineered to make replacement easier. Use a screwdriver for the initial installation, then maintain the replaceable wear glide without tools.

No re-gluing
No digging out old pads
No snapping plastic tabs
No special removal tools

When the felt wears down, remove the magnetic wear glide with two fingers and snap a fresh one into place in seconds.

Designed to make upkeep easier for older adults and anyone who wants less effort when replacing worn chair glides. With safe access to the underside of the leg, replacement does not require repeatedly removing the mounted base or turning the whole chair upside down.

Built from 16 years of hands-on experience

MagniGlide was designed by a maintenance professional who spent 16 years working directly with thousands of furniture glides.

The goal was simple: an easier, better way to maintain smooth sliding and help protect hardwood floors—without turning every worn pad into another repair project.

See MagniGlide in action

Install once. Refresh in seconds.

Install once. Replace in seconds.

Screw. Secure. Position the base in the center of a suitable wooden furniture leg, then secure it with the included screw using a screwdriver.
Snap on the glide. The magnetic connection holds the replaceable floor-contact piece.
Refresh what wears. Pull the glide off by hand for cleaning or replacement. The base stays installed.

Choose your kit

Complete MagniGlide Kits

Starting at $11.99
4 complete glides · 1 chair

Install the bases once. Replace the felt glides when they wear out.
Kits available for 1, 2, or 4 chairs.

Shop Complete Kits

Free shipping on orders $35+. U.S. standard shipping: $5 below $35 after discounts. Express: $10. Taxes excluded.

MagniGlide permanent screw-mounted base separated from the replaceable floor-contact glide piece with high-density virgin wool felt

Replacement Glides

Starting at $8.99
8 replacement pieces

Already have MagniGlide? Replace the removable felt glide pieces.
Permanent bases are not included.

Shop Refills

Inside MagniGlide

Built to Last

Premium wool. Protected edges.

High-density, 100% virgin unbleached wool is secured with a specialized structural adhesive inside a recessed, cup-style housing. The housing is designed to help shield the felt’s edges from dirt, debris, pet hair and everyday wear.

A magnetic connection made for renewal

Four neodymium magnets in the permanent screw-mounted base connect to the wear glide’s steel interface. Unlike friction-fit systems, MagniGlide’s magnetic retention is engineered for repeated replacement cycles without wearing out the permanent base.

Inspect the felt regularly and keep it free of grit to support smooth sliding and floor protection.

Patent protected: U.S. Patent No. 12,144,423 B1.

A closer look at the components

Size & fit

Approx. 11/16″ (17 mm)Total assembled height, uncompressed

Approx. 1″ (26 mm)Overall diameter

Approx. 1″ (24 mm)Felt glide diameter

Measurements & compatibility

The complete assembly settles to just under 5/8″ (approximately 15 mm) in height after 2–4 weeks of normal use, leaving approximately 3/16″ (5 mm) of felt extending below the protective cup. Check the mounting surface and dimensions before installation. Designed for chairs, tables, couches, side tables, bed frames, and other furniture with suitable wooden legs or wooden mounting surfaces. Suitable for straight or slightly angled legs—not heavily angled legs.

Before you order

A few useful details

Complete kit or replacement pieces?+

Choose a complete kit for first-time installation. Replacement packs are for existing MagniGlide bases and do not include bases or screws.

Will it fit my furniture?+

Designed for chairs, tables, couches, side tables, bed frames, and other furniture with suitable wooden legs or wooden mounting surfaces. Suitable for straight or slightly angled legs—not heavily angled legs. The overall diameter is approximately 1″ (26 mm). Check the leg’s size and condition before installation.

Which floors is it designed for?+

Common finished hard surfaces such as wood, laminate, luxury vinyl and tile. Test first, inspect the felt regularly and keep it free of trapped grit.

How do I get free shipping?+

Free shipping on orders $35+. Applies to U.S. standard shipping after discounts; taxes do not count toward the threshold.

Need help choosing? Contact us

Replace the felt.Lose the hassle.